Description
DCC AND SOUND EQUIPPED
Kodachrome paint scheme
In 1949, EMD introduced the GP7. The basic design followed most diesel switchers with the addition of a short hood instead of an end-cab. The hoods were also full height to better accommodate the diesel engine and mechanical and electrical components.
In 1954 EMD upgraded the GP7 to become the 1,750 horsepower GP9. Externally, the first GP9s were virtually unchanged from the last GP7s. Later versions would include different louver arrangements and the last ones would come without the frame skirting. The GP9 was available with all of the fuel tank, steam generator, and dynamic brake options as the GP7, including "torpedo tube" air tanks mounted on the roof.
Many railroads chose to rebuild their GP7s and GP9s for continued service. Often times, it was cheaper to do this rather than purchasing brand-new locomotives.
SP FEATURES:
Nathan P3 Horn
Signal lights per road number
Large fuel tank
Dynamic brakes
Whip antenna
During the 1970s, SP went on an ambitious task to rebuild their GP9 fleet, known as the "GRIP" program. This program included new wiring, new main generator, complete rebuild of the prime mover with new parts, improved battery box doors, and removed rear light packages (in some cases). A small batch of GP9's were renumbered into the 2868-2899 class. Demoted to "switchers" in order to save maintenance costs, this class included rebuilt and non rebuilt units.
We are offering #2873, which retained its full light package on both ends. #2873 currently enjoys its retirement at a Northern California museum. It may be the last locomotives in this scheme still operating. Out of the large batch of SP GP9E's, only 9 were painted into these colors.
ROAD NUMBER SPECIFIC FEATURES:
#2873
Phase II Switcher class rebuild "R"
Signal lights on both ends
Rear mounted fuel fillers
Blank pilots, large SP style road numbers and number boards
#3370
Phase II GRIP rebuild "E"
No signal lights (Ex T&NO)
Rear mounted fuel fillers
Modified "catch" style pilots
Beacon, large SP style numbers with Santa Fe style number boards
#3792
Phase II GRIP rebuild "E"
Modified front signal lights
Rear mounted fuel fillers
Modified "catch" style pilots
Flat dynamic brake fan
Small Santa Fe style numbers and number boards
#3846
Phase III GRIP rebuild "E"
Front signal lights
Forward mounted fuel fillers
Modified "catch" style pilots, large SP style numbers with Santa Fe style number boards
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
"Nub" style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Minimum radius: 18" - Recommended radius: 22"
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
Kodachrome paint scheme
In 1949, EMD introduced the GP7. The basic design followed most diesel switchers with the addition of a short hood instead of an end-cab. The hoods were also full height to better accommodate the diesel engine and mechanical and electrical components.
In 1954 EMD upgraded the GP7 to become the 1,750 horsepower GP9. Externally, the first GP9s were virtually unchanged from the last GP7s. Later versions would include different louver arrangements and the last ones would come without the frame skirting. The GP9 was available with all of the fuel tank, steam generator, and dynamic brake options as the GP7, including "torpedo tube" air tanks mounted on the roof.
Many railroads chose to rebuild their GP7s and GP9s for continued service. Often times, it was cheaper to do this rather than purchasing brand-new locomotives.
SP FEATURES:
Nathan P3 Horn
Signal lights per road number
Large fuel tank
Dynamic brakes
Whip antenna
During the 1970s, SP went on an ambitious task to rebuild their GP9 fleet, known as the "GRIP" program. This program included new wiring, new main generator, complete rebuild of the prime mover with new parts, improved battery box doors, and removed rear light packages (in some cases). A small batch of GP9's were renumbered into the 2868-2899 class. Demoted to "switchers" in order to save maintenance costs, this class included rebuilt and non rebuilt units.
We are offering #2873, which retained its full light package on both ends. #2873 currently enjoys its retirement at a Northern California museum. It may be the last locomotives in this scheme still operating. Out of the large batch of SP GP9E's, only 9 were painted into these colors.
ROAD NUMBER SPECIFIC FEATURES:
#2873
Phase II Switcher class rebuild "R"
Signal lights on both ends
Rear mounted fuel fillers
Blank pilots, large SP style road numbers and number boards
#3370
Phase II GRIP rebuild "E"
No signal lights (Ex T&NO)
Rear mounted fuel fillers
Modified "catch" style pilots
Beacon, large SP style numbers with Santa Fe style number boards
#3792
Phase II GRIP rebuild "E"
Modified front signal lights
Rear mounted fuel fillers
Modified "catch" style pilots
Flat dynamic brake fan
Small Santa Fe style numbers and number boards
#3846
Phase III GRIP rebuild "E"
Front signal lights
Forward mounted fuel fillers
Modified "catch" style pilots, large SP style numbers with Santa Fe style number boards
GP9 SERIES LOCOMOTIVE FEATURES:
Full cab interior
Wire grab irons
Coupler cut levers
See-through cab windows
Flexible rubber trainline hose
Flexible rubber MU hoses
Drop steps unless noted
"Nub" style walkway tread
Lift rings
Sander lines
Windshield wipers
MU stands
See-through cab windows
Bell placement & type per prototype
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
Body-mounted McHenry operating scale knuckle couplers
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Fine-scale Celcon handrails for scale appearance
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
Bidirectional constant LED lighting so headlight brightness remains constant
Heavy die-cast frame for greater traction and more pulling power
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately-painted and -printed paint schemes
Fully-assembled and ready-to-run
Minimum radius: 18" - Recommended radius: 22"
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
