Description
DCC AND SOUND EQUIPPED
An EMD SW1000 is a 4 axle diesel switcher locomotive built by General Motors Electro-Motive Division between June 1966 and October 1972. Power was provided by an EMD 645E 8-cylinder engine which generated 1,000 horsepower. This locomotive was built on the same common frame as the EMD SW1500, giving it an overall length of 44 feet 8 inches. Over one-third of SW1000 production went to the Burlington Northern Railroad.
In the late 1960s CB&Q purchased a small group of EMD's new SW1000 switching locomotive that were incorporated into the new Burlington Northern roster after the 1970 merger. BN then purchased their own SW1000's shortly thereafter. In 1996 that fleet was then absorbed into the BNSF roster while retaining the BN green and white paint scheme. That BN heritage is clearly demonstrated in this Primed For Grime release. Many of the SW1000's retained their green paint up until retirement from the BNSF roster.
BNSF FEATURES:
Roof mounted beacon (Flash function in DCC only)
Fire cracker antenna
MU hoses
Winterization cab window
SW1000 LOCOMOTIVE FEATURES:
Lit ground lights
Detailed cab interior
Drop steps unless noted
MU stands
Exhaust stack
Printed numberboards
Fine scale handrails
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Separately applied wire grab irons
See-through radiator intake grille and cab windows
Low or high mounted windshield wipers per prototype
Rectangular or oval builder's plate where appropriate
Separately applied Air tank
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Minimum radius: 18"
NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Cube Speaker for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Excellent low-speed operation
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
An EMD SW1000 is a 4 axle diesel switcher locomotive built by General Motors Electro-Motive Division between June 1966 and October 1972. Power was provided by an EMD 645E 8-cylinder engine which generated 1,000 horsepower. This locomotive was built on the same common frame as the EMD SW1500, giving it an overall length of 44 feet 8 inches. Over one-third of SW1000 production went to the Burlington Northern Railroad.
In the late 1960s CB&Q purchased a small group of EMD's new SW1000 switching locomotive that were incorporated into the new Burlington Northern roster after the 1970 merger. BN then purchased their own SW1000's shortly thereafter. In 1996 that fleet was then absorbed into the BNSF roster while retaining the BN green and white paint scheme. That BN heritage is clearly demonstrated in this Primed For Grime release. Many of the SW1000's retained their green paint up until retirement from the BNSF roster.
BNSF FEATURES:
Roof mounted beacon (Flash function in DCC only)
Fire cracker antenna
MU hoses
Winterization cab window
SW1000 LOCOMOTIVE FEATURES:
Lit ground lights
Detailed cab interior
Drop steps unless noted
MU stands
Exhaust stack
Printed numberboards
Fine scale handrails
Signal hoses with silver glad hands unless noted
Front and rear trainline hoses with silver glad hands
Separately applied wire grab irons
See-through radiator intake grille and cab windows
Low or high mounted windshield wipers per prototype
Rectangular or oval builder's plate where appropriate
Separately applied Air tank
McHenry scale knuckle couplers - Kadee compatible
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
DCC-ready features Quick Plug plug-and-play technology
Improved 5-pole skew wound can motor with flywheels and multi-link drivetrain for with 21-pin NEM connector
Wheels with RP25 contours operate on all popular brands of track
Window packaging for easy viewing
Highly-detailed, injection molded body
Painted and printed for realistic decoration
Fully assembled and ready-to-run
Minimum radius: 18"
NEW FEATURES:
Operating ground lights
Newly designed can motor is more powerful and quieter than before
DCC-ready models feature 21-pin plug
DCC & sound models feature Tsunami2 sound with dual cube speakers
LED lighting for long life and reliable operation
SOUND-EQUIPPED MODELS ALSO FEATURE
Onboard Tsunami2 DCC/Sound decoder
Cube Speaker for optimal sound quality
Sound units operate in both DC and DCC
Engine, horn, and bell sounds work in DC
Some functions are limited in DC
All functions NMRA compatible in DCC mode
Operating lighting functions with F5 and/or F6 (Flashing ditch lights, beacon, etc)
Excellent low-speed operation
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
