NCE 524007 (PH-10R) Power House Pro 10 Amp Starter System with Radio

The Power Pro 10-R is a radio equipped system. It is designed to eliminate the need for a tethered throttle. All features of the Pro Cab are usable while in radio mode. Up to 60 additional radio and tethered cabs can be used simultaneously.

Contents of the 10 Amp PH-10 System:

CS02 Command Station

PB110A Booster

Pro Cab

Seven foot coiled cable

Twelve inch, four wire flat cable

Seven foot, four wire flat cable

UTP cab bus panel

Seven foot, six wire flat cable for the UTP panel

Power Pro system reference manual

We recommend that you follow the instructions below to connect your

system to a small test track first. After your system is checked out

completely and known to be working then consider the final installation

locations for components and connections to the track.

ProCab Wireless :

Features:

True two way wireless capability to your ProCab

All features of your ProCab are available without plugging in

Uses ANY battery chemistry: Alkaline, NiCad, NiMH, Lithium, Lead Acid

40+ hours of operation (typical) with Alkaline batteries

Automatic switchover to bus power when plugged in

Graceful degradation of operation when approaching maximum range

ProCab Wireless Supplement :

Features:

True two way wireless capability to your ProCab

All features of your ProCab are available without plugging in

Uses ANY battery chemistry: Alkaline, NiCad, NiMH, Lithium, Lead Acid

40+ hours of operation (typical) with Alkaline batteries

Automatic switchover to bus power when plugged in

Graceful degradation of operation when approaching maximum range

BE CAREFUL

The maximum input voltage to your PH-10 or PH-10R is 22 Volts

AC. Voltages higher than 22 Volts AC will ultimately destroy your booster

resulting in an expensive repair charge.

We recommend our 18V AC, 10 Amp transformer (P.N. 524-241,

"Brutus"). If you are using a different transformer be sure to measure the

actual no load voltage before connecting it to your system.