Description
Easy to use. Good for deep, single pours. No measuring or mixing. Just heat
and pour E-Z Water according to package directions, to form ponds, streams,
rivers and harbors. Non-toxic, low-odor product that hardens in minutes. Reheat
with a heat gun to shape various accents, such as ripples, waves, rapids and to
remove scratches.
Contents cover 154 in2 when
poured to a depth of 1/8"
16 oz vol (473 mL)
INSTRUCTIONS Covers an area 154 in2 / 14 in. diameter x 1/8 in. deep Use E-Z
Water to model a variety of water features. It works well for deep pours of a
manageable size. It must be applied in one single pour to avoid transition
lines. If pouring around buildings or submerging items into E-Z Water, test
compatibility as E-Z Water is poured in a heated state. Prepare Nonporous Water
Area: Before pouring E-Z Water, seal water cavity to prevent seepage and air
bubbles. Paint on a coat of Flex Paste (C1205) or apply layers of Plaster Cloth
(C1203, C1191-C1193) and let dry thoroughly (approx. 24 hours). To prevent E-Z
Water from seeping onto layout, build up banks with Plaster Cloth strips. Paint
sealed cavity with Earth Colors Liquid Pigment (C1215-C1223) or acrylic paint
and let dry. The illusion of water depth is enhanced with different shades of
paint. Darker colors model deep water and lighter colors model shallow. Let all
products in water area dry thoroughly before pouring E-Z Water. Residual
moisture could have an adverse effect. Heat and Pour: Melt E-Z Water in a clean
and dry metal container (disposable or dedicated) only. Using a burner or hot
plate only, melt pellets slowly over medium heat (approx. 160ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃð-180˚F). Using a
disposable utensil (craft stick, dowel rod, etc.), stir gently to avoid unwanted
bubbles. When E-Z Water has liquefied, remove from heat and pour immediately
into water cavity to desired depth. Do NOT pour E-Z Water in layers or
transition lines will be visible. NOTE: Do NOT heat above 275ÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃÃð F. E-Z Water can
be reheated if it hardens before pouring. E-Z Water will darken slightly the
longer it is exposed to heat. E-Z Water can be remelted in water cavity using
the Heat Tool (RG5162), but take care not to melt foam or plastic structures.
Tint E-Z Water: Use powdered fabric dye only (do not use liquid dye). Add 1/16
teaspoon to one bag of pellets before melting. Add Textures: While E-Z Water is
setting, shape ripples using the Heat Tool. To add textures, softened with the
Heat Tool and carve with a hobby knife. Repair Surface: Use the Heat Tool to
remove scratches and make repairs. Hold Heat Tool about 6 above surface and
move it in a continuous circular motion.
