Rapido 320001 RailCrew R/C UNCOUPLER, HO

RapidoSKU: RAP00320001

Description

The RailCrew ON-OFF Remote Uncoupler sits under the roadbed to reliably
uncouple locomotives, passenger or freight cars, no matter what brand of
standard magnetic knuckle couplers you use. At just 1 3/4" wide (44mm) and 7/8"
deep (22mm) it's not much larger than a permanent magnet and can be easily
controlled by DCC accessory decoders. It also features an LED between the rails
that marks the uncoupling zone which only operates when in the "ON" position.
This is handy to have as the uncoupler is totally hidden from view.



When the uncoupler is "off" it has no effect on the couplers on your equipmemt.
That means you won't have any unwanted uncoupling. This is really handy in large
yards and on the mainline, especially near runaround tracks or industrial spurs.



This revolutionary new product features:

Compact 1 3/4"(44mm) diameter x 7/8"" (22mm) height

Easy to install on existing layouts

Momentary 12V DC power means you can power numerous machines off of one power
supply.

Only uncouples cars when you want it to

Works with all major brands of magnetic couplers

Low-profile, compact design for all layout types (including multi-deck and
portable layouts)

Ideal for uncoupling both freight and passenger cars

LED between and below the rails marks uncoupling zone when in "ON" position

Available in singles, 6-packs or 12-packs

The RailCrew ON-OFF Remote Uncoupler is available a single unit or in a
six-pack. Installation onto an existing layout is easy: drill a 1/8" hole
between the ties at the track centre line. Insert the steel centering pin
(included) into your hole saw and cut a larger hole from beneath the subroadbed
using the 1/8" hole as a guide. Push the uncoupler in from below and connect the
power. That's it. If you are doing a new layout build you can do the entire
installation from above.

You may also like

Recently viewed