{"product_id":"rail-town-n-3912-run-through-locomotive-maintenance-shed-with-lights-and-welding-effects","title":"Rail Town N 3912 \"Run Through\" Locomotive Maintenance Shed with Lights and Welding Effects","description":"Modernize your car or loco shops with this complete kit, based on a Rock Island prototype in Oklahoma City. Featuring realistic details and parts molded in two colors, the kit is complete with LED interior lighting and a custom-built circuit that randomly flashes LEDs to simulate welding.\u003cbr\u003e\u003cbr\u003eEasily wired, both lighting units feature bridge rectifiers so you don't have to worry about positive or negative leads. Simply connect to a power supply (sold separately); the welding circuit works best on 12 Volts AC or DC, and a resistor is included if you wish to use higher voltage. The interior lighting can be run from 7-19 Volts AC or DC.\u003cbr\u003e\u003cbr\u003eThe interior lights are mounted in special light bars for easy installation that looks more realistic. A special clear circuit protector holds the welding unit in place on the sidewall, to provide plenty of room on the shop floor. All lights can easily be seen through the kit's eight skylights and six windows, and both end doors can be opened and closed for more visibility or to move models in and out of the structure, which easily fits over most sections of straight track. The welding circuit can only be used with 7-20 volts D\/C or 6-14 volts A\/C. 12 volts A\/C or D\/C is recommended. Polarity does not matter because there is a bridge rectifier installed. You can increase the voltage to 14-24 volts A\/C or 20-24 volts D\/C by using the enclosed resistor.\u003cbr\u003e\u003cbr\u003e2 Side Walls\u003cbr\u003e2 End Walls\u003cbr\u003e2 Roof Panel Halves\u003cbr\u003e2 Base Halves\u003cbr\u003e4 End Doors\u003cbr\u003e2 Door Tops\u003cbr\u003e8 Skylights\u003cbr\u003e6 Windows\u003cbr\u003e2 Ridge Vents (only 1 is needed)\u003cbr\u003e1 Circuit Reader\u003cbr\u003e1 Welding Effect Circuit\u003cbr\u003e1 Light Bar\u003cbr\u003e1 LED\u003cbr\u003e1 Foil Reflector Tape\u003cbr\u003eMade from Injection Molded Plastic\u003cbr\u003eStructure Lighting LEDs can be used with 7-19 volts A\/C or D\/C (polarity doesn't matter because there is a bridge rectifier installed)\u003cbr\u003eDimensions: 5-1\/8\" x 2-1\/8\" x 1-3\/4\" (13cm x 5.4cm x 4.5cm)\u003cbr\u003eMade in the USA","brand":"Rail Town","offers":[{"title":"Default Title","offer_id":42627735355455,"sku":"RLT-3912","price":67.64,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0269\/7461\/7663\/files\/RLT-3912-2__15547.png?v=1764133475","url":"https:\/\/factorydirecthobbies.com\/products\/rail-town-n-3912-run-through-locomotive-maintenance-shed-with-lights-and-welding-effects","provider":"Factory Direct Hobbies","version":"1.0","type":"link"}