Description
DCC AND SOUND EQUIPPED
In 1949, EMD introduced the GP7. The basic design followed most diesel switchers with the addition of a short hood instead of an end-cab. The hoods were also full height to better accommodate the diesel engine and mechanical and electrical components. In 1954 EMD upgraded the GP7 to become the 1,750 horsepower GP9. Externally, the first GP9s were virtually unchanged from the last GP7s. Later versions would include different louver arrangements and the last ones would come without the frame skirting. The GP9 was available with all of the fuel tank, steam generator, and dynamic brake options as the GP7, including "torpedo tube" air tanks mounted on the roof. Many railroads chose to rebuild their GP7s and GP9s for continued service. Often times, it was cheaper to do this rather than purchasing brand-new locomotives.
In 1976, the federal government created the Consolidated Rail Corporation (Conrail) to assume control of several bankrupt and/or financially struggling eastern railroads. Among these was the bankrupt Reading Company, whose railroad assets were sold to Conrail on April 1, 1976. Part of this aquisition was a group of 17 EMD GP7 locomotives. While several units were put to work immediately with patched numbers and logos, others were repainted into CR's medium blue scheme- although there was considerable variation from unit to unit. This group of three former Reading GP7s feature a variety of detail and artwork differences and will be right at home running with rebuilt ALCOs and other geeps during early Conrail operations.
ROAD NUMBER SPECIFIC FEATURES:
#5831 Footboard pilots, early repaint with no "Can Opener" logo
#5834 Unigue non-standard "Conrail" font on sides
#5839 Former passenger unit - no dynamic brakes and retains the underframe water tanks, Early repaint with no "Can Opener" logo
CR FEATURES:
Ex-RDG repaints- first time in Genesis
Mostly similar spotting features to RDG units also in this run
Leslie S3L horn
Long hood-forward operation
Different wheel bearing styles per prototype
Different fuel tank capacities per prototype
FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
"Nub" style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Minimum radius: 18"
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of "In Service" equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
In 1949, EMD introduced the GP7. The basic design followed most diesel switchers with the addition of a short hood instead of an end-cab. The hoods were also full height to better accommodate the diesel engine and mechanical and electrical components. In 1954 EMD upgraded the GP7 to become the 1,750 horsepower GP9. Externally, the first GP9s were virtually unchanged from the last GP7s. Later versions would include different louver arrangements and the last ones would come without the frame skirting. The GP9 was available with all of the fuel tank, steam generator, and dynamic brake options as the GP7, including "torpedo tube" air tanks mounted on the roof. Many railroads chose to rebuild their GP7s and GP9s for continued service. Often times, it was cheaper to do this rather than purchasing brand-new locomotives.
In 1976, the federal government created the Consolidated Rail Corporation (Conrail) to assume control of several bankrupt and/or financially struggling eastern railroads. Among these was the bankrupt Reading Company, whose railroad assets were sold to Conrail on April 1, 1976. Part of this aquisition was a group of 17 EMD GP7 locomotives. While several units were put to work immediately with patched numbers and logos, others were repainted into CR's medium blue scheme- although there was considerable variation from unit to unit. This group of three former Reading GP7s feature a variety of detail and artwork differences and will be right at home running with rebuilt ALCOs and other geeps during early Conrail operations.
ROAD NUMBER SPECIFIC FEATURES:
#5831 Footboard pilots, early repaint with no "Can Opener" logo
#5834 Unigue non-standard "Conrail" font on sides
#5839 Former passenger unit - no dynamic brakes and retains the underframe water tanks, Early repaint with no "Can Opener" logo
CR FEATURES:
Ex-RDG repaints- first time in Genesis
Mostly similar spotting features to RDG units also in this run
Leslie S3L horn
Long hood-forward operation
Different wheel bearing styles per prototype
Different fuel tank capacities per prototype
FEATURES:
Coupler cut levers
Trainline and MU hoses
Drop steps unless noted
MU stands
"Nub" style walkway tread
Windshield wiper
Lift rings
Wire grab irons
Windshield wipers
Sander lines
Bell placement & type per prototype
Detailed fuel tank with fuel fillers, fuel gauges, breather pipes, and retention tanks
Blomberg-B trucks with appropriate bearing caps
Speed recorder unless noted
See-through cab windows and full cab interior
Fine-scale Celcon handrails for scale appearance
Etched metal radiator intake grilles and fan grilles
Air tanks mounted below sill unless noted
Body-mounted McHenry scale knuckle couplers - Kadee compatible
DCC-ready features Quick Plug plug-and-play technology with 21-pin NEM connector
Scaled from prototype resources including drawings, field measurements, photographs, and more
Accurately painted and printed paint schemes
Genesis driveline with 5-pole skew wound motor, precision machined flywheels, and multi-link drivetrain
All-wheel drive with precision gears for smooth & quiet operation
All-wheel electrical pickup provides reliable current flow
Wheels with RP25 contours operate on all popular brands of track
LED Lighting for realistic appearance
Heavy die-cast frame for greater traction and more pulling power
Minimum radius: 18"
PRIMED FOR GRIME MODELS FEATURE:
Duplicated look and feel of "In Service" equipment
Faded base colors matched to the prototype
Perfect starting point for adding grime and rust
SOUND-EQUIPPED MODELS ALSO FEATURE:
Onboard DCC decoder with SoundTraxx Tsunami2 sound
Dual cube speakers for optimal sound quality
Sound units operate in both DC and DCC
Full DCC functions available when operated in DCC mode
Engine, horn, and bell sounds work in DC
All functions NMRA compatible in DCC mode
Precision slow speed control
Program a multiple unit (MU) lashup with lead unit only horn, bell, and lights
Many functions can be altered via Configuration Value (CV) changes
CV chart included in the box
